National Gun Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello, I am sorry this is my first post haha. Glad to now be a part of the community. But sadly I founds this sight due to a problem I have. I disassmbled and reassembled my Mark III target pistol (I did not mess with the bolt,spring, firing pin set) and now it wont fire! Everything is together so there is no lost parts but now the bolt wont slide back to cock it and the gun's safety wont come off of fire. Any help is appreciated =]
 

·
Registered
Joined
·
9,382 Posts
Here, watch this and see if it helps.

 

·
Registered
Joined
·
9,382 Posts
You can email Ruger or take it to a smith. That is probably the best you can get at this time.

I don't have a Mark 3, I know it is different than my Mark 2. I would take it apart and assemble it again by the video. I do know that on mine I have to hold it at the right angle to get everything to fall into place. Once it's figured out, it becomes really easy.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Thank you for your advice =]
an update: The bolt only slides back when I dont have the mainspring in all the way, the part the goes out the top can be in though.
 
1 - 5 of 5 Posts
Top