National Gun Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
I was looking at building an AK-47 from a Bulgarian AK-47 Milled kit, but found out that the kit NEEDED a milled receiver. Is this true or can I get away with a stamped receiver and put a new AKM rear trunnion for stamped receivers. I can't find a front trunnion anywhere so could I get away with using only a stamped rear trunnion?

Thanks,

John
 
1 - 1 of 1 Posts
Top