National Gun Forum banner

2A1 Indian rifle 7.62/308

1K views 4 replies 1 participant last post by  Loadit 
G
#1 ·
Anyone load for one of these? What data do you use? :---
Loadit
 
G
#3 ·
Would like the 7.62x51. I have 308 and I did the pressure factor figures and it looks like the starting load for the 308 is higher than the pressure "50,000 psi. for the 2A1.
I have been shooting the managed recoil loads and get 5 or 6 firings from it neck sizing before having to full length resize. :---
Loadit
 
#4 ·
Using military brass and Winchester lg rifle primers:
150 gr bullet- 42.0 - 44.0 grs H335
- 40.0 - 42.0 grs H4895- best data for 7.62x51 M1As with military barrels
168 gr bullet- 37.0 - 39.0 grs H4895

180 gr bullet- 36.0 - 38.0 grs H4895
- 44.0 - 46.0 grs H414

If you don't have any of these powders, list some that you do have and I'll see if I have data for it. None of these are over the 7.62x 51 specs for pressure.
 
G
#5 ·
I started with IMR 4895 and was loading 39 to 42 grs. with 150 gr.sp.
Used almost all that powder up.
I now have 1 lb of H-VARGET , one lb of H 4895 and one of IMR 4350.
I have loaded 40 rds with 44 gr H-Varget so far.

These are the other cals I am loading.
303, 7.62x54, and 8x57. :---
Loadit
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top