National Gun Forum banner

mosin

  1. Rifle Discussion
    So I want to purchase my first rifle and have chosen the mosin because of its legendary reliability and its cheapness. I wanted to know the length from the back of the stock to the trigger to see if this firearm would fit me comfortably. Thank you for any help you can give me.
  2. General Gunsmithing
    I managed to get it all mounted. After I was reading through the instructions again and notice a part I missed. Says do not drill completely through into receiver. Well I did.if your familiar with these kits its just the receiver not the chamber. My question is. Did I just ruin this rifle. :/...
  3. Rifle Discussion
    Hey guys, You all helped me out a lot with identifying a Type 99 Arisaka a few months ago so I'm wondering if you can give me any insight on the history of my "new" 91/30 Mosin. From what I understand, the rifle was assembled in 1932 at the Izhevsk factory, as indicated by the 1932r on the top...
  4. General Gunsmithing
    I have a m91/30 that I believe has a burr in the chamber. After firing a round, the extraction is very hard. In fact, the first round I fired, I had to put a block of wood against the bolt and bang on it to extract the cartridge. The cartridges all have scratches about 1/4 inch long near the...
Top